KRM Module
KRM Module
As a spin-off from our R&D efforts, we have created a new radio module for DECT. The module is intended for use in KIRK telecom products, but at the request of our business partners we now offer the module for sale.
The KIRK Radio Module (KRM) represents frontline technology, and is unique in several ways:
· It is smaller than any existing radio modules comprising the same facilities
· It has outstanding performance
· It is mounted with the use of Ball Grid Array technology
· It is priced lower than existing, larger and less performing modules
The DECT module complies with ETSI (EN 301 406) requirements and meets the Generic Access Profile (GAP) requirements.
KRM 1800 v_2 is based on DECT technology from National Semiconductor (NSC) and PA technology from MURATA.
|
Size |
19,70 x 32,20 x 3,45 mm |
|
RF range |
1870-1930 MHz |
|
Receiver sensitivity |
Typ.< -94 dBm (BER,1000 ppm) |
|
Transmit power (NTP) |
Typ. 24 dBm (VCCLMX=2.6V, VCCPA=3.6V |
|
Power supply range |
2.5-2.7V (VCCLMX), 3.0-4.6V (VCCPA) |
|
Temp. range |
0 to +40 c |
|
Refernce clock freq. |
10.368 MHz |
|
Programming |
NSC timing concept for LMX 4169 |
|
Other features |
Output port for fast antenna diverstiy (FAD) |
|
|
High isolation of RF-emissions during blind slot (opitional) |
|
|
Output port for fast locking (optionel) |
|
KIRK UDB Board
KIRK Unit Detection Board has been developed for integration with the National SC UDB II board.
KIRK KRM 1800_V2 Demo Board
A KIRK KRM 1800 demo board is available for testing and measuring purposes on dedicated DECT testing equipment.
The demo board has been tested at Electronic Technology Systems, Germany. Please click here to read the test report.
|
You are here: Company 
